 |
Our Vacuum bell jars are available in most sizes, including the popular and enduring 12" x 14" used on laboratory coating units. Unlike some suppliers our Bell Jars and Cylinders are measured on the ID as we are aware that some supplier's bell jars are a tight, if not impossible fit over existing electrode configurations.
All our Vacuum Bell Jars and Cylinders are manufactured from Borosilicate glass with the edges ground. After manufacture each bell jar and cylinder is annealed to give maximum strength and minimum stress within the material.
We can supply Vacuum Bell jars (and Vacuum Cylinders) from 4" (100mm) ID or smaller through to 19" (480mm).
Stock sizes for both Bell Jars and Cylinders are:
| Nominal Sizes | Actual Sizes | | 4" | 97 mm ID | | 4.5" | 122 mm ID | | 6" | 151 mm ID | | 7" | 176 mm ID | | 8" | 204 mm ID | | 9.5" | 239 mm ID | | 12" | 304 mm ID |
All the above can be supplied at increased height. For example the 300mm x 360mm bell Jar can be supplied up to 500mm high.
'L' gaskets can be supplied in many sizes. Common stock sizes are: 4" Nitrile and Viton 6" Nitrile and Viton 10" Nitrile and Viton 12" Nitrile and Viton 18" Nitrile and Viton
If the bell Jar or Cylinder you require falls outside the stock sizes above please contact us with your exact requirements.
See our Vacuum Bell Jar Degassing Systems
Page.
|
|
|
|
|
|
|